Braun Welch Allyn ThermoScan PRO 4000 Mode D'emploi page 61

GB
➘
1 Chamberlain, J. M. Terndrup, T. E., New Light on Thermometer Readings,
Contemporary Pediatrics, March 1994.
2 Chamberlain, J. M., et al., Determination of Normal Ear Temperature with an Infrared
Emission Detection Thermometer; Annals of Emergency Medicine, January 1995.
How to use Braun ThermoScan
1.
To achieve accurate readings, make sure a new,
clean probe cover is in place before each
measurement.
2.
When the probe cover is in place, the thermo-
meter turns on automatically. Wait for the ready
signal beep.
3.
Fit the probe snuggly into the ear canal, then push
the start button.
4.
If the probe has been fitted correctly into the ear
canal during the complete measuring process, a
long beep will signal the end of the measuring
process. You can be assured to have taken an
accurate temperature reading. The result is
shown on the display.
If you take the temperature of another person, the
«ExacTemp» light will be of help. It flashes during
the measuring process as long as the probe is
correctly positioned, and lights up continuously
when an accurate reading has been taken.