Adjusting To The Preferred Color (Color Management) - JVC DLA-RS6710 Instructions

D-ila projecteur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjusting to the Preferred Color (Color Management)

Based on the setting of the selected "Color Profile", you can adjust each of the following colors according to your
preference: Red, Orange, Yellow, Green, Cyan, Blue, and Magenta.
Press the [ADVANCED MENU] button to display the "Color Profile" menu
1
Set "Color Management" to "On", and press the [OK]
2
button
You can also perform setting from "Picture Adjust"""Color Profile"""Color
0
Management" in the menu.
Adjust to the preferred color.
3
A Select "Color Selection", and press the H I keys to
select the color to adjust
For color adjustment, select the color from the
0
following: "Red", "Orange", "Yellow", "Green",
"Cyan", "Blue", "Magenta".
B Adjust the selected color
Item
Setting Range
Axis Position -30 to 30
Hue
-30 to 30
Saturation
-30 to 30
Brightness
-30 to 30
Selecting "Reset" resets all the adjustment data.
0
Pressing the [BEFORE/AFTER] button on the
0
remote control enables you to check the image
before adjustment.
Press the [MENU] button to exit
4
38
Description
Fine-tune the position
of the central axis of
the selected color.
Adjusts the hue (color
tone).
Adjusts the color
saturation (vividness).
-30 (dull) to +30 (vivid)
Adjusts the
A
brightness.
-30 (dark) to +30
B
(bright)
Axis Position (Image)
Green
Yellow
Cyan
Blue
Magenta
Picture Adjust
>
Color Profile
Color Profile
Film 1
Color Management
Color Selection
Axis Position
0
Hue
0
Saturation
0
Brightness
0
Before
Operate
Exit
MENU
Select
Picture Adjust
>
Color Profile
Color Profile
Film 1
Color Management
On
Off
Color Selection
Red
On
Axis Position
0
Hue
0
Saturation
0
Brightness
0
Before
Reset
Operate
Exit
Back
Select
BACK
MENU
Adjustable range when
Red is selected: ± 30°
with Red as the center
Counterclockwise
rotation: +
Clockwise rotation: -
Red
On
Red
Reset
Back
BACK

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dla-rs4910

Table des Matières