Converting 2D Movies To 3D Movies For Viewing; Adjusting 3D Movies - JVC DLA-RS6710 Instructions

Converting 2D Movies to 3D Movies for Viewing

Press the [3D SETTING] button to
1
display "3D Setting"
The [3D SETTING] button is positioned
0
differently on the remote control depending on
the model in use. (p. 17)
Select "2D to 3D conversion" followed
2
by "On", and press the [OK] button
You can also perform setting from "Input
0
Signal"""3D Setting"""2D to 3D conversion" in
the menu.
INPUT

Adjusting 3D Movies

3D video images may appear differently to different
viewers. It may also be affected by your physical
condition at the time of viewing.
You are therefore recommended to adjust the video
images accordingly.
Press the [3D SETTING] button to
1
display "3D Setting"
The [3D SETTING] button is positioned
0
differently on the remote control depending on
the model in use. (p. 17)
You can also perform setting from "Input
0
Signal"""3D Setting" in the menu.
34
.
Input Signal
> 3D Setting
3D Format Auto
2D to 3D conversion On
Parallax 0
Crosstalk Cancel
0
Operate
Exit Back
MENU Select
Press the [MENU] button to exit
3
MEMO
Depending on the movies, 3D effect may be less than
0
what you expected.
This item is grayed out and displayed as "Off" during
0
3D or 4K input.
BACK
Adjusting parallax (Parallax)
Adjust the displacement of the image for the left
and right eyes separately to obtain the best 3D
effect.
To do so, use the H I keys to move the cursor.
0
Setting range: -15 to +15
0
Adjusting crosstalk (Crosstalk Cancel)
Double images (overlapping of the left image with
the one on the right or vice versa) can be reduced
to deliver a clear quality.
To do so, use the H I keys to move the cursor.
0
Setting range: -8 to +8
0
Adjustment cannot be made when "2D to 3D
0
conversion" is set to "On".
Press the [MENU] button to exit
2