Putting Into Operation - Starmix haaga 677 Mode D'emploi

4 Putting into operation

4.1 Fitting the push handle
Danger of injury!
• Avoid injury due to push handle acci-
dentally falling over.
NOTE
The push handle can be fitted in two dif-
ferent positions depending on the body
height of the user.
1. Turn handle fittings (1) so that they are
positioned vertically upwards.
2. Press locking springs (3) on push
handle (2).
3. Push the push handle (2) simultane-
ously into the two handle fittings (1).
4. Press the push handle into the handle
fittings until the locking springs
engage.
2
3
3
1
42
2
1
4.2 Connecting battery cable
CAUTION!
Damage to the sweeper due to improper
connection.
• The sweeper may be damaged and the
warranty rendered void if the cables
are mixed up on the battery.
1. Pull cover forwards at the front bottom
edge (1).
2. Swivel cover up (2).
3. Plug battery cable onto contact tab on
the battery (3).
red = positive terminal (+)
blue = negative terminal (-)
4. Close cover (4).
1
3
2
4