Design And Function; Important Components; Led Indicators; Overload Protection - Starmix haaga 677 Mode D'emploi

3 Design and function

3.1 Important components

1. Push handle
2. Waste bin
3. Waste bin handle
4. Disc brush height adjustment
5. Carrying handle
6. Disc brush
7. Side guide roller
8. Running wheel
9. Fine dirt sweeping roller
10. Holding-down device
11. Dust filter
12. Machine number
13. On/Off switch

14. LED indicators

15. Battery
16. Angled wheel
19
17. Sweeping lip
18. Sweeping plate
19. Clutch
20
20. Toothed sleeve
21. Gear protection
3.2 LED indicators
The LEDs next to the ON/OFF switch on
the sweeper show the state of charge of
the battery during battery operation.
• Red and green LEDs flash:
The sweeper was automatically
switched off by the built-in electronics
since the battery charge was too low.
1. Switch off sweeper
(see Switching off the sweeper).
2. Charge battery
(see Charging the battery).
10
7
5
6
6
16
17
16
18
21

3.3 Overload protection

The motors are equipped with overload
protection in order to prevent damage.
The sweeper switches off automatically
in the event of overloading (e.g. due to
blocked brushes).
1
2
3
13
14
4
15
9
8
12
11
9
41