Before the appliance is used, it must be properly positioned and installed as described in this
manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when
using the appliance, follow basic precaution, including the following:
−
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter,
and do not use an extension cord.
−
Replace all panels before operating.
−
It is recommended that a separate circuit, serving only your appliance be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
−
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapours and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
−
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
−
Do not connect or disconnect the electric plug when your hands are wet.
−
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
−
Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this material. All other servicing should be referred to a qualified technician.
−
Use two or more people to move and install appliance. Failure to do so can result in back or
other injury.
−
To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below
90°F (32°C). This unit must be installed in an area protected from the element, such as wind,
rain, water spray or drips.
−
The appliance should not be located next to ovens, grills or other sources of high heat.
−
The appliance must be installed with all electrical, water and drain connections in accordance
with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly
grounded in accordance with the National Electrical Code and local codes and ordinances is
required.
−
Do not kink or pinch the power supply cord of appliance.
−
The fuse (or circuit breaker) size should be 15 amperes.
−
It is important for the appliance to be levelled in order to work properly. You may need to
make several adjustments to level it.
−
Never allow children to operate, play with or crawl inside the appliance.
−
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may
damage or discolour the interior.
−
Do not use this apparatus for other than its intended purpose.
IMPORTANT SAFETY RULES
19