Waste Water Connection - Fagor VISUAL PLUS VPE-061 Manuel D'instructions

ENGLISH

WASTE WATER CONNECTION

Fig. 10
Fig. 11
VISUAL PLUS INSTRUCTIONS MANUAL
The appliance complies with the
corresponding
(DVGW, SVG,KIWA, WRC).
Steam resistant pipe, no hoses
used.
Ø 30 pipe with continuous slope
(at least 5% or 3º), do not reduce
the pipe diameter.
Fixed connection with standard
odourless waste pipe.
Ensure the measurements for the
drainage are correct:
Steam generator pumping volume
in a reduced space of time: 0.7
l/second.
Average temperature of waste
water: 65 ºC
Applicable standard: DIN 1986, T1
For outlets not fitted with an
odourless waste pipe, leave 2 cm
between the outlet and the floor
drainage hole.
Fig. 10
48
requirements