Removing The Tap - Hendi 274125 Mode D'emploi

7.4. Removing the tap

Removing the tap is prohibited if the bowl contains the product or any other liquid.
• Release the bowl from the machine body, using two
fingers to prise it away from the fixed steel part of
the mixer auger(A) and the others to grip the outlet
edge of the bowl(B): Gradually pull the bowl harder
until it comes away from its seating;
Fig. 18
• Slide the bowl upwards using both hands;
Fig. 19
• Slide the mixing auger upwards with one hand, tak-
ing care to grip it by the rotation pin;
Fig. 20
• Place the bowl on a flat surface and using both
hands, remove the gasket by sliding it upwards in
the direction shown by the arrow.
Fig. 21
To remove the tap, proceed as follows:
• move the rod to the maximum dispensing position;
Fig. 22
EN
15