Publicité
Les langues disponibles
Les langues disponibles
Appendix C — Ceiling Mount
The ceiling mounting plate must be attached to a structural object such as concrete that will
support the weight of the mount and Dome Camera.
1. Select a suitable mounting location
and verify there is sufficient cable
to connect with cables from the
housing.
2. Mark and drill mounting holes in
the surface using the ceiling
mount flange.
3. Pull out cables required to connect
to the dome camera from the
ceiling.
4. Attach the ceiling mount bracket
using
through the locking nut.
5. Tighten the housing with the pipe
using the socket after routing
cables through the pipe.
6. Attach the housing's safety wire to
the
tapping screw.
7. After connecting cables, fix the
pipe to the ceiling mount using the
locking nut.
8. Tighten set screws of the socket
and locking nut with the supplied
wrench.
15
screws
routing
ceiling
mount's
cables
m6X35
Publicité
