Batavia MAXX Serie Mode D'emploi page 6

English
c. Use only the recommended batteries
in battery-powered tools. The use of
non-suitable batteries can cause inju-
ries or fires.
d. Keep a battery which is not in use,
away from paperclips, coins, keys,
nails, screws, or any kind of metal item
which may short-circuit the contacts.
A short circuit between the contacts
may cause burns or fire.
e. Upon inappropriate use, liquid may
leak from the battery. Avoid contact
with this. In the case of accidental
contact, wash of with liberal quantities
of water. If the eyes are contaminated,
please consult a physician. Battery acid
can cause skin irritation or acid burns.
f. Due not open the battery pack and the
batteries. Leaking battery acid can
cause burns.
g. Due not expose the battery to fire. The
battery will explode.
3. Intended use
With this cordless cutter you have a conven-
ient helper for all cutting tasks around the
house. The battery powered cutter is suita-
ble for cutting paper, cardboard, wallpaper,
carpet, leather, textiles and similar
materials.
The battery powered cutter is especially
suitable for cutting fabric; even very tight
turns are easily achieved. Wallpaper is easily
cut even when wet. The cutter makes the
job of trimming wet wallpaper less
time-consuming and difficult.
Due to its advanced Lithium Ion technology,
the batteries of the cutter do not self dis-
charge, and the unit is always ready even
during periods of non use. Please notice the
included safety notes and keep this manual
for later reference.
4. Removing the cutting head
First, press the orange button on both sides
of the cutting head, and then pull the head
off to the front.
6
1. press
5. Technical data
Model . . . . . . . . . . . . . . . . JBJ-XG01
Voltage . . . . . . . . . . . . . . . . . . .3.6 V
Battery . . . . . . . . . . . . . . . Lithium Ion
Capacity . . . . . . . . . . . . . . 1500 mAh
Sound pressure level L
. . . . . . . . . . . . . 70.45dB(A), K=3 dB(A)
Sound power level L
Hand / Arm vibration . 6.40m/s
Power mains adaptor:
Input voltage . . . . . . 100-240v~50~60Hz,
. . . . . . . . . . . . . . . . . . . . . 0.4Amax,
Output voltage . . . . . . . . . . . . . . . . 6 V
Output current . . . . . . . . . . . . . 600 mA
Charging time (hours). . . . . . . . . . .2 – 3
6. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in pack-
aging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool
and its accessories are made from various
materials such as metals and plastics. Take
defective components to a special refuse
collection point. Ask about these at your
specialist shop or local council.
Batteries
6.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of
explosion.
2. pull
pA
81.45dB(A), K=3 dB(A)
WA
, K=1.5m/s
2 2