Festo 8038559 Notice D'utilisation page 32

IO-Link DA interface – Operating instructions
The controller is displayed with the IO-Link master module in the device tree.
The controller CECC-LK has 4 IO-Link ports, namely X12 ... X15. The corresponding item is selected in the device tree depending on
which port the IO-Link D/A interface is connected to. In our example, the D/A interface is connected to port X12 and the top item under
the IO-Link master is selected.
A menu can be activated by right clicking, in which case "Set device" must be activated.
32
© Festo Didactic 8038560