Publicité
Les langues disponibles
Les langues disponibles
2 |
Description
FOX-360
We are pleased that you decided on the FOX-360 with cutting edge
control engineering and illuminated display.
The controller is characterized by its ease of operation and elegant
design. The specifically developed charge characteristic curves will
extract the maximum power from your solar modules and store it
completely in the batteries. We hope you will enjoy your solar
installation.
The FOX-360 is a solar charge controller for modulated currents up to
20 A, suitable for AGM, gel and lead acid batteries. Consumers can be
connected up to a current consumption of 20 A maximum.
The adaptive total discharge protection monitors and protects the
battery against damaging total discharge, and alternatively the
nightlight function can be used. When using the nightlight function, a
consumer will be switched on during the time the modules do not
supply charge current (i.e. when it is dark). Ideal for the operation of an
orientation light or small lights for the prevention of break-ins.
The optimised charge characteristic curve in combination with the
hardware PWM control achieves a distinctly faster and gentler
charging of the battery; hazardous gassing or overcharging are safely
prevented.
The FOX-360 can charge two battery systems. Ex factory, 90 % of the
power are charged to battery 1 and 10 % of the power to battery 2.
The consumer current is always taken from battery 1.
On switching on, the controller recognises fully automatically whether
a 12 V or 24 V battery system is connected. The active battery cut-out
ensures the protection against reverse current and allows for an
extremely low voltage drop between module and battery.
18
Publicité
