Initial Operation; Maintenance / Care / Storage - Brill 240 ABT Manuel

3. Information concerning the instructions
Read the instructions carefully
and observe the information con-
GB
tained in them. Acquaint yourself
with the use and the controls
and observe the safety instruc-
tions on the Accu Bush Trimmer.
4. Where to use your Accu Bush Trimmer
The Brill Accu Bush Trimmer is
part of a wide range of 24-Volt
tools available from Brill. To
charge and power your Bush
Trimmer you will require the
Brill PowerAccu 24 PA,
Art. No. 65006. The PowerAccu
can be used as a power source
for all 24-Volt Brill tools.
The Brill Accu Bush Trimmer
240 ABT is designed for cutting

5. Initial operation

5.1. Preparations for use
(Fig. A)
Recharge the PowerAccu before
using the unit for the first time
and if the PowerAccu is flat.
5.2. Putting into Operation
(Fig. A)
The safety switch 1 prevents
the Bush Trimmer being
switched on unintentionally.

6. Maintenance / Care / Storage

6.1. Maintenance and care
Maintenance includes all jobs
which keep your Accu Bush
Trimmer in perfect working
order. By regularly checking
the unit (firm seating of screw
connections, cracks, damage)
8
For safety reasons, child-
A
ren under the age of 16 as
well as people, who are not
acquainted with the instructions
should not use this Accu Bush
Trimmer.
individual bushes, shrubs and
climbing plants in private,
domestic gardens and hobby
gardens and should not be
used in public facilities, parks,
sports grounds, next to roads
or for agriculture or forestry.
Compliance with the instructions
for use enclosed by Brill
is a precondition for the regular
use of the machine.
To begin using the Bush Trimmer:
1. Plug the accu clip of the
Bush Trimmer into the socket
of the PowerAccu (Fig. B).
2. Push the safety switch to the
left to position I. Press the
ON button 2. The Accu Bush
Trimmer starts moving.
3. To stop the Bush Trimmer,
release the ON button 2.
and replacing defective or worn
parts you can prevent accidents
and failure.
Repairs may only be carried
out by Brill service centres or
dealers authorised by Brill.
Keep these instructions in a safe
place.
These instructions also contain
hints on use, service and main-
tenance.
Attention! For health and
A
safety reasons the Bush
Trimmer must not be used for
cutting grass / grass edges or
for chopping material for com-
posting.
Warning! The blade does not
stop moving immediately
after the trimmer has been
switched off.
Attention! The safety de-
A
vices installed on the unit
by the manufacturer may not be
removed or by-passed, i. e. by
tieing a switch to the handle as
there is danger of injury because
the tool will not switch off auto-
matically.
Warning! Before checking,
A
cleaning and maintaining
the Accu Bush Trimmer:
1. Push the safety switch 1 to
the right to position 0.
For safety reasons, the ON
button 2 is locked.