Proper Use; Assembly; Putting Into Operation - Brill 400 HS Mode D'emploi

4. Notes on these Operating Instructions
Please read these operating
instructions carefully and
observe the notes they contain
as well as the accompanying
notes on safety. Use these oper-
ating instructions to familiarise
yourself with how to operate
and control your lawnmower,
its proper use, and the notes on
safety.

5. Proper Use

The Brill Hedge Trimmers are
designed for cutting hedges in
domestic gardens and allot-
ments. They are not intended for
commercial use in public places,
parks, sports grounds, next to
roads, in agriculture or forestry.
Adherence to the instructions for
use enclosed by Brill is a pre-
condition for the proper use of
the equipment. The instructions
for use also include the operat-

6. Assembly

Checking all the parts are
included:
The hedge trimmer box contains
the following parts:
Hedge trimmers
.
Hand safety-guard
.
Guide handle
.
Cable clip
.
7. Putting the Hedge Trimmers into Operation
Always visually inspect the
hedge trimmers before begin-
ning work. Do not use the hedge
trimmers if the safety devices
(safety handle, safety covers)
Warning! Never allow
A
children or other people
who are not familiar with
these operating instructions to
use your hedge trimmers.
Local laws may specify a mini-
mum age for users of this type
of gardening equipment.
ing, care and maintenance
instructions.
This machine can cause serious
injuries.
Only use these hedge trimmers
in daylight or when the area
where you are working is lit by
ample artificial lighting.
Warning! Because of the
A
risk of physical injury,
Blade protectors with screws
.
and dowels
Operating instructions
.
Assembly
(Figure A, B)
Push the hand safety-guard 1
into the guide at the 3-point
guide handle 2 (Figure A).
and / or thecutting device is
damaged or worn.
Never remove any of the safety
devices.
Remember that the user or
operator is responsible for all
accidents that occur involving
other people or their property.
Keep these operating instructions
in a safe place.
these hedge trimmers must not
be used formowing or edging
lawns.
Moreover, the hedge trimmers
must not be used as a shredder
for shredding tree and hedge
cuttings or for levelling uneven
ground.
Only use permitted extension
cables made of PVC with the
coding H05 RN-F or H05 VV-F
with a maximum length of 15 m.
Push the 3-point guide handle
onto the hedge trimmers and
secure in place using 4 screws
(Figure B).
This machine can cause serious
injuries.
Children must never use this
machine.
GB
13