Brill 240 ABT Manuel page 12

Notes on safety
A
regarding PowerAccu /
Danger of fire
GB
Never charge the PowerAccu
after having been heated up
by operation or sun. Let cool
down first.
Never charge the PowerAccu
anywhere near acids and
easily inflammable materials.
Danger of fire!
Warranty
The manufacturer warrants its
products for exclusively non-
commercial use for a period of
24 months from the date of ori-
ginal purchase. This warranty
does not affect statutory war-
ranty claims. The warranty
covers all substantial faults of
the product, which are caused
by defects in material and work-
manship. If a product exhibits
such a defect we will, at our
option, repair or replace it
without cost for parts and labour
provided the following require-
ments are fulfilled:
The product must have
.
been sold to the customer in
a legally correct way.
The original receipt with the
.
customer's address, date of
purchase, model and product
designation is presented as
proof of purchase. The product
must have been purchased
within the EC.
10
Only use the original Brill Charg-
ing Unit LG 24.
The Accu Bush Trimmer should
not be operated whilst charging
process of the PowerAccu.
Do not throw the used Power-
Accu into fire under any circum-
stances. Danger of fire!
We would draw attention to
the fact that, under the product
liability legislation, we are not
The product was handled
.
properly and according to
the recommendations in the
operating instructions. It is
essential that the product has
been maintained and cleaned
according to the information
in the operating instructions.
No attempt to disassemble or
repair the product has been
made by either the buyer or
an unauthorised third party.
It must be ensured that only
.
original replacement parts and
original accessories approved
by the manufacturer are used.
There may be an increased
risk of consequential damage
and accidents if non-original
parts or non-original accesso-
ries are used. This warranty
does not cover consequential
damages.
The product must be either
.
taken directly or sent with
postage paid to an authorised
service centre. The original
receipt must be sent with the
product.
liable for loss or damage caused
by our products when such are
caused by improper repairs or
when during an exchange of
parts such parts are used which
are not manufactured by or
approved by ourselves, and the
repairs are not carried out by
an authorised Brill service centre
or an authorised specialist
dealer. The same restrictions
also apply for supplementary
and accessory parts.
The warranty does not cover
.
damage from misuse, abuse,
use of unsuitable, non-original
or unauthorised interchange-
able parts, replacement parts
or accessories, as well as
improper maintenance and
cleaning.
The products contain various
components that are subject to
normal or use-related wear.
The warranty does not extend
to these wearing parts.
In particular the following
components relating to this
product are excluded:
Blades / blade bar / drive belt /
care roller / blade roller /
lower blade / cutting plate /
cutting line / cutting head
cover / saw blade /
nickel-cadmium-cell (battery).
The manufacturer warranty does
not affect existing warranty
claims between the customer
and the dealer / seller.