Sleep Timer; Using A Password (Av Mode Only); Entering A Password; Changing The Password - Pioneer PureVision PDP-506XDE Mode D'emploi

Useful Adjustment Settings
12

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
1
Press HOME MENU.
2
Select "Sleep Timer" ( /
3
Select the desired time ( /
• You can select from among "Off" (cancel), "30 min", "60
min", "90 min", and "120 min".
4
Press HOME MENU to exit the menu.
NOTE
• Five minutes before the selected time elapses, the remaining
time appears every minute.
• To check the remaining time, perform steps 1 and 2. After
checking the time, press HOME MENU to restore the
previous display.

Using a password (AV mode only)

The Plasma Display System provides the Child Lock and
Channel Lock functions for preventing children from watching
inappropriate programmes. You need to enter a password
when watching programmes with "Block" specified. Before the
system is shipped, "1234" is preset as the factory-default
password. You can however, change the password as you
want.
When using the Home menu you select "Auto Installation",
"Analogue TV Setup", "DTV Setup", or "Password", a screen
prompting password entry appears to prevent others from
changing the programme settings at their choices.

Entering a password

If you select a channel blocked with Child Lock or Channel Lock
or if password entry is requested when attempting to open the
menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons 0 – 9.
Please Input Your Password.
NOTE
• If you fail password entry three times, "Invalid password."
appears, and the menu is closed. In order to display the
password entry screen again to unlock the password, select
the blocked channel or open the menu again.
• If the password entry screen disappears before entry, you
may recall it by pressing ENTER.
58
En
then ENTER).
then ENTER).

Changing the password

Use the following procedure to change the password.
1
Press HOME MENU.
2
then ENTER).
Select "Setup" ( /
3
Select "Password" ( /
• The password entry screen appears. Enter the current 4-
digit password using buttons 0 – 9.
4
Select "Change Password" ( /
Change Password
Please Input New Password.
Reconfirm New Password.
5
Enter a 4-digit password to be newly set, using buttons
0 – 9.
6
Enter the same password that you have entered in step 5.
• If an unmatching password is entered, the operation
goes back to step 5 for reentry from the beginning.
• If you fail password change three times by entering
unmatching passwords, the menu is closed.
7
Press HOME MENU to exit the menu.
NOTE
• Take a note of the newly set password and keep it handy.
then ENTER).
then ENTER).