Main Unit; Insert Or Replace Batteries; Time And Date Of System Setup - VISIOMED TensioFlash KD-735 Manuel D'utilisation

MAIN UNIT

Date/time (alternating)
Memory indicator
Low battery
Blood pressure level
classi cation indicator
Irregular heartbeat symbol
Ready to in ate indicator
LCD display
Blood pressure level
classi cation indicator
wrist cu

INSERT OR REPLACE BATTERIES

When LCD shows battery symbol, replace all
batteries with new ones.
1. Slide the battery cover in the direction of the
arrow to open.
2. Insert 2 alkaline AAA batteries in the correct
polarity direction. Inserting them incorrectly may
damage the device and the warranty. Never use
rechargeable batteries. Use single use batteries.
3. Replace the battery cover.
34 Visiomed - KD-735 - 032016
Systolic
Diastolic / pulse
(alternating)
MEM button
On/O button
Disposal of empty battery to the authorized
collecting party subject to the regulation of each in-
dividual territory.
If the unit will not be used for a long period, please take
out all batteries to avoid liquid leakage damaging the unit.

TIME AND DATE OF SYSTEM SETUP

1. Press the START and MEM button after
a beep the month will blink.
2. Use the MEM button to adjust the
month.
3. Press the START button to save your
settings and display the day.
4. Use the MEM button to adjust the day.
5. Follow the steps to adjust the time then the minute.
6. Press START button to confirm your settings.
7. Once you changed the batteries, you should readjust the
time and the date.
Visiomed - KD-735 - 032016 35