Precautions Before Use; Features Of The Tensioflash® Kd-798; Main Device; Changing The Batteries - VISIOMED TensioFLASH KD-798 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. PRECAUTIONS BEFORE USE

- Do not confuse self-monitoring with self-diagnosis. Blood pressure readings should be interpreted
by a physician or trained healthcare professional, who is familiar with your medical history.
Measurements do not replace your doctor's treatment or regular check-ups.
- If you are taking medication, consult with your physician to determine the most appropriate time
to measure your blood pressure.
- Do not use this device on children and the elderly without medical advice.
- This device should not encourage self-medication or adjusting your treatment.
- Do not use the device in a moving vehicle. This can result in erroneous measurements.
- Blood pressure measurements determined with this device are equivalent to those obtained by a
trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by
the American National Standard for Electronic or automated sphygmomanometers.
- Do not use any other cuff than the one provided.
4. FEATURES OF THE TENSIOFLASH® KD-798
1. Indication of SYS, DIA, Pulse/Min. measurements and WHO international blood pressure
classification level
2. Cardiac arrhythmia detection
3. Automatically stores the 60 last readings.

5. MAIN DEVICE

Time
Date
Irregular heartbeat
Systolic
Low battery
De ation
Diastolic
In ation
Blood pressure level
classi cation indicator
Pulse
Memory indicator
Wrirst cu
24
Visiomed - KD-798 - Manuel d'utilisation - 0720176
Time
Date
Irregular heartbeat
Systolic
Low battery
De ation
Diastolic
In ation
Blood pressure level
classi cation indicator
Pulse
Memory indicator
Wrirst cu
Blood pressure level
classi cation indicator
LCD Display

6. CHANGING THE BATTERIES

When the LCD screen displays "Battery", the batteries are low or depleted.
1. Open the battery cover underneath the device.
2. Replace the used battery, taking care to observe the indicated polarity. A polarity error may cause
damage and void the guarantee. Never insert rechargeable batteries. Use disposable batteries. Do
not mix new batteries with used batteries.
3. Replace the cover.
Do not dispose of old batteries with household waste. Take your used batteries to a collection
point.
If not used for a long period of time, be sure to remove the battery from the device to prevent
leakage of liquid that may damage the device.
Do not use batteries other than the batteries mentioned, do not recharge non-rechargeable
batteries, or throw them into a fire.

7. TIME AND DATE SETUP

1. Press the START and MEM button simultaneously. The month flashes.
2. Use the MEM button to set the month.
3. Press the START button to save your settings and display the day.
4. Use the MEM button to set the day.
5. Follow the steps to set the hour and then the minutes.
6. Press START to confirm your selection.
7. The date and time must be adjusted at each battery change.
Memory
On/O
Visiomed - KD-798 - Manuel d'utilisation - 072017
25

Publicité

Chapitres

Table des Matières
loading

Table des Matières