Introduction; Guidelines For Reading The Manual; Storing The Manual - Wega EVDS io Mode D'emploi

1

INTRODUCTION

Please read this Manual in its entirety before using
the appliance, in order to optimise machine performance
and operate it safely.
The espresso coffee machine you have purchased
has been designed and manufactured with innovative
methods and technologies which ensure long lasting
quality and reliability.
This Manual is the guide that will enable you to learn
about the benefits of choosing our brand. You will find
information on how to get the best out of your appliance,
how to keep it running efficiently and what you should
do if problems occur.
Keep this Manual in a safe place. If you lose it, you can
ask the Manufacturer for another copy.
Before using the machine, carefully read and follow the
instructions contained in this publication. Keep this manual
and all attached publications in an accessible and secure place.
This document assumes that the machine is installed in a location
where the current work safety and hygiene standards are observed.
The instructions, drawings and documentation con-
tained in this Manual are technical and confidential. They
are the sole property of the Manufacturer, and may not
be fully or partially reproduced in any way.
The Manufacturer reserves the right to make any
improvements and/or modifications to the product. We
guarantee that this Manual reflects the technical state of
the appliance at the time it was released to the market.
We take this opportunity to invite customers to make
any proposals to improve the product or its Manual.

1.1 Guidelines for reading the Manual

This Manual is divided into separate chapters. The chapter
order is linked to the temporal logic of the life of the machine.
Terms, abbreviations and pictograms are used to facilitate
the immediate understanding of the text.
This Manual consists of cover, index and a series of chapters.
Each chapter is sequentially numbered. The page number is
shown in the footer.
The first page displays the machine identification data and
the last page displays the date and revision of the Instruction
Manual.
User manual
ABBREVIATIONS
Sec. = Section
Chap. = Chapter
Para. =
Paragraph
P. = Page
Fig. = Figure
Tab. = Table
UNITS OF MEASUREMENT
The units of measurement are those provided by the In-
ternational System (SI).
PICTOGRAMS
Descriptions preceded by these symbols contain very
important information/requirements, particularly in regards
to safety. Failure to comply with these may result in:
• Danger to the operator's safety;
• Injury, including serious injury, to users (in some cases,
even death);
• Loss of the guarantee;
• The Manufacturer waiving liability.
DANGER symbol used when there is a risk of permanent serious
injury that would require hospitalisation, or in extreme cases,
even cause death.
CAUTION symbol used when there is a risk of minor injury that
could require medical attention.
WARNING symbol used when there is a risk of minor injury that
could be treated with first-aid or similar measures.
NOTE symbol used to provide important information about the
topic.

1.2 Storing the Manual

The Instruction Manual must be stored in a safe place and
accompany the machine in all ownership transfers.
The manual should be stored, handled with care with clean
hands and not placed on dirty surfaces. Do not remove, tear
or arbitrarily modify any of its parts.
The manual must be stored away from moisture and heat,
and in close proximity to the machine it refers to.
On the user's request, the Manufacturer can provide ad-
ditional copies of the Instruction Manual.
29