Service Information - Wolf ICBWWD30 Instructions D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Service Information

Troubleshooting
IMPORTANT NOTE: If the warming drawer does not
operate properly, follow these troubleshooting steps:
Verify that power is being supplied to the warming
drawer.
Check electrical connections to ensure that the instal-
lation has been completed correctly.
Refer to the troubleshooting guide in the Wolf warming
drawer use & care guide.
If the warming drawer still does not work, contact a
Wolf dealer. Do not attempt to repair the warming
drawer yourself. Wolf is not responsible for service
required to correct a faulty installation.
The information and images in this guide are the copyright property of Wolf Appliance, Inc. Neither this guide nor any information or images contained
herein may be copied or used in whole or in part without the express written permission of Wolf Appliance, Inc. ©Wolf Appliance, Inc. all rights reserved.
Service Information
If service is necessary, maintain the quality built into your
warming drawer by calling a Wolf dealer.
When calling for service, you will need the model and
serial number of the warming drawer. Both numbers are
listed on the product rating plate, located on the left front
floor area of the inner cabinet. To access the rating plate,
the drawer must be fully open. Refer to the illustration on
page 5 for location of the rating plate.
9
wolfappliance.com

Publicité

Table des Matières
loading

Table des Matières