Canon ImageRUNNER C1028i Guide De Démarrage page 29

–
If you want to install only Color
Network ScanGear, select only
Color Network ScanGear in this
step, then proceed to step 25.
For more information refer to
the Network ScanGear
Installation Guide (located on
the UFRII LT/FAX User Software
CD-ROM).
–
If the amount of free disk space
is insuicient to install the
software, an error message is
displayed. Make sure there is
suicient disk space, and then
try installing the software again.
5
6
7
8
9
–
If you are using a shared printer
in the Print Server (Point and
Print) environment, it is
necessary to install the Canon
Driver Information Assist Service
in the server computer to set up
the printer coniguration
automatically or use
Department ID Management.
–
If the Canon Driver Information
Assist Service is already installed
on your computer, this screen is
not displayed.
–
If you are using an operating
system equipped with Windows
Firewall, the following message
box may appear. If you want to
use Canon Driver Information
Assist Service, click [Yes]. If you
select [No], you cannot use
Canon Driver Information Assist
Service.
3 Set up Computers and Software
10
Select the machine (Product
Name: iR C1028) using the
information displayed in [Printer
List] → press [Add].
If the machine's information is not
displayed in [Printer List] on the
screen, click [Search Again].
11
12
27