Chauvet DJ Bubble Machine Guide De Référence Rapide page 4

B-250 Bubble Machine QRG
Fuse
Replacement
Mounting
Fill/Replace
Bubble Fluid
Operation
Thumb Screw
1. Disconnect this product from power.
2. With a Phillips #2 head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse and replace with a good fuse of the same type
and rating.
4. Screw the fuse holder cap back into place and reconnect power.
Before mounting this product, read the Safety Notes. Place bubbler on a flat,
level surface or use the mounting brackets provided. Ensure that the bubbles
are not shooting directly into anyone's face or above heavy traffic areas, as
bubble fluid leaves a slippery surface. The bubble machine must not have
more than a 5° angle of inclination.
1. Place the Bubble Machine on a level surface and loosen the thumbscrew
on the front of the unit for fluid tank access. Lift the cover.
2. Fill the tank with bubble fluid.
Note: Use of CHAUVET® bubble fluid (BJU), specially formulated
for use with CHAUVET® bubble machines, is recommended. The
tank capacity is 24 oz (0.7 l).
3. Lower the cover and tighten the screw.
1. Plug into a suitable wall outlet.
2. Turn on the Bubble Machine.
Note: Do not leave unused fluid in the reservoir for an extended
period. The fluid may thicken in the reservoir.
4
EN