Combined Modes (A+B, A-B, A:b, A•B) - Kübler 573 Serie Mode D'emploi

6.4.3. Combined Modes (A+B, A-B, A:B, A•B)
These modes allow displaying either the single channels A and B or the calculated result
according to the selected combination. The SET key allows scrolling between the three
displays.
A
B
<AB>
When you use one of the combined modes, you will first have to do the same settings as with
the "Dual" mode for individual display of inputs A and B.
The combined display will then be the result calculated from both single values.
The following additional parameters provide a final scaling facility, so you can read out the
result of your combination in proper engineering units:
Menu Text
Proportional Scaling Factor
Multiplies the result by this setting
Reciprocal Factor
Divides the result by this setting
Additive Constant
Adds or subtracts this setting
Decimal Point
Sets the decimal point for the combined
display value
000000
00000.0
0.00000
Calculation Formula:
Final display value
6.573.011.E00_7b_e.doc / Sep-08
The upper bar of the high order digit indicates that you display
channel A.
The lower bar of the high order digit indicates channel B.
When no bar is lit, the display shows the result of the calculation,
according to the combination set.
No decimal point
one decimal position
---->
five decimal positions
=
value calculated from <AB>
Setting Range
-10000 ... 10000
1 ... 99999
-99999 ... 99999
m_Fac
x +/-
d_Fac
Default
1000
1000
0
000000
P_Fac
Page 17 / 28