Kübler 573 Serie Mode D'emploi page 30

• This manual is an essential part of the unit and contains important hints about
function, correct handling and commissioning. Non-observance can result in
damage to the unit or the machine or even in injury to persons using the
equipment!
• The unit must only be installed, connected and activated by a qualified electrician
• It is a must to observe all general and also all country-specific and application-
specific safety standards
• When this unit is used with applications where failure or maloperation could cause
damage to a machine or hazard to the operating staff, it is indispensable to meet
effective precautions in order to avoid such consequences
• Regarding installation, wiring, environmental conditions, screening of cables and
earthing, you must follow the general standards of industrial automation industry
• - Errors and omissions excepted –
Version:
573.011.E00_07a_04/2007
573.011.E00_07b_10/2007
6.573.011.E00_7b_e.doc / Sep-08
Safety Instructions
Description:
First edition
Add new key CMD commands
Page 2 / 28