Cleaning And Maintenance; Problems And Solutions; Removal - EUROM Flameheater Round 11000 Manuel D'utilisation

Cleaning and maintenance

• Clean the powder-coated surfaces with a soft, damp cloth, if necessary. with
some steel cleaner. Never use highly flammable, corrosive or abrasive cleaning
agents!
• Regularly remove all dirt, soot and dust from the burner head to keep use safe.
• If necessary, cover the patio heater with the optional cover when the patio
heater is not in use.

Problems and solutions

Problem
Pilot flame does not
burn
Pilot flame does not
remain burn
Burner does not go
on

Removal

In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse
effects to health and the environment caused by unregulated
waste collection. Therefore, please make sure that yo u bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
Cause
- Gas bottle valve closed
- Gas bottle is empty
- Gas nozzle is blocked
- Air in system
- Loose conection
- Dirt around pilot flame
- Loose connection
- Bad thermocouple
- Gas leak in pipeline
- Low gas pressure,
bottle almost empty
- Low gas pressure,
bottle almost empty
- Blocked nozzle
- Bad thermocouple
- Pilot flame not
assembled corrrect
- Device stands not
horizontal
Solutions
- Open it
- Exchange
- Clean it (have it cleaned)
- Vent by keeping the control
button pressed at the pilot
position for 90 seconds, just as
with switching on
- Check and close
- Cleaning
- Check and close
- Have it replaced
- Check and close or replace
- Exchange
- Exchange
- Clean it (have it cleaned)
- Have it replaced
- Install pilot flame properly
- Place the device on a flat
surface
36