Description, Composition And Assembly - EUROM Flameheater Round 11000 Manuel D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

before each use, after changing the gas cylinder and at least every

month. Do not use the device until you have checked all

connections for leaks! In the event of a gas leak, do not put the

device into operation, but first rectify the leakage or replace the

leaking parts or gas hose with original parts or gas hose supplied by

the manufacturer. Then check again for gas leaks. Leakage tests

should be carried out with a soap solution; never use open

fire.

5. Do not make any changes to the device; that can cause malfunction

and cause dangerous situations.

6. Keep the device clean, see 'Cleaning and maintenance'. Control

panel, burner, housing and air circulation duct must always be

clean. Make sure that all parts removed for cleaning are replaced.

7. The flexible gas hose must comply with the national laws and

regulations and must be checked regularly and always be replaced

3 to 4 years after production. The year of production is on the hose.

The length of the hose is 60 cm.

8. Never change anything on the device, so do not paint for example.

Improper

connections, modifications and / or changes to the device can cause

personal injury or damage to the device or other objects.

9. Repair and inspection (at least once a year) must only be carried

out by a suitably qualified person.