Ecolab Smart Dose II Rack Manuel D'utilisation page 89

Fig. 7: Spare parts: TurboSmartPump II
Description
TurboSmartPump II:
PP-design
PVDF-design
The pumps come standard equipped with the PVC-PP/PVDF connector sets (pos. 1a/b)
on both sides (see Fig. 9).
To connect the PTFE pipes, the pressure side of the connector set be replaced with a
threaded connection (pos. 3a/b) and the matched clamping ring (pos. 4) see
Ä Table on page 38.
Fig. 8: Connection set TurboSmartPump II
Pos. Description
- TurboSmartPump II EPDM Version
- TurboSmartPump II Pump FKM Version
1a Connector set 10/16 PVC PP
1b Connector set 10/16 PVC PVDF
2a Pump head complete EPDM Version
2b Pump head complete FPM Version
3a Bolted connection for 8/12 PP
3b Bolted connection for 8/12 PVDF
4 Clamping ring Ø12, 1.4401
5 Diaphragm, PTFE-coated
Wear and Spare Parts (Standard Version)
35
Item. no. EBS no.
106052 10033839
106064 10033838
Item. no. EBS no.
106052 10033839
106064 10033838
249237 10005459
249216 10016089
206001 10010658
206002 10010663
207724 10001614
207714 10000409
415000027 10076991
30601023 10010677
417102260 Rev. 4-02.2019