6.0 operating instructions
EN
WARNING
!
•
Ensure the house circuit breakers for the power supply are turned on. When initially connecting the appliance to
a power source, the appliance will perform an LED check. The appliance will flash on and off for 5 seconds.
•
Do not move or remove the glass panel when the appliance is plugged in and operating. This will cause the
remote control and touch panel to no longer function.
Once the appliance has been plugged into a grounded electrical outlet or hard-wired to a dedicated
6.1
operating control panel and remote control
This electric appliance can be operated by the touch-on remote panel, or by the battery-powered remote control.
The operation and functions are the same for both methods.
note:
The touch display panel is shown by LEDs on the bottom right of the appliance. The LEDs will disappear after
10 seconds of no function change. The main power button will be dim.
18
W415-2984 / 01.13.21
120V power supply, it is ready to operate.
Control Panel
Remote Control