Recessed Installation; Metal Feet Installation - Napoleon NEFL50HF-BT-LOWC Manuel

3.3.1 recessed installation

Create an opening for the appliance (see "framing" section for details).
A.
Remove the front surround (see "front surround removal / installation" section).
B.
Remove the cord from the appliance (see "hardwiring installation" section).
C.
Insert the appliance into the opening and complete hard wiring installation (see "hardwiring installation"
D.
section).
Securing the appliance in place using four screws (supplied) (Fig. 3-7).
E.
Install media (see "finishing" section).
F.
Re-install the front surround.
G.
3.3

metal feet installation

Remove the front surround (see "front surround
A.
removal / installation" section).
Remove the eight screws from the bottom of the
B.
appliance (Fig. 3-8).
Install the metal feet using the eight screws
C.
previously removed in Step A (Fig. 3-9).
Check if the feet are secured properly. Ensure
D.
the appliance is standing straight and still.
Install media (see "finishing" section).
E.
Reinstall the front surround (Fig. 3-10).
F.
Wall
D x 2
Fig. 3-9
installation
EN
A x 4
Fig. 3-7
Fig. 3-8
Fig. 3-10
13
W415-2984 / 01.13.21