S+S Regeltechnik AERASGARD ACO2-W Notice D'instruction page 11

G
AERASGARD ® ACO2 - SD ⁄ ACO2 - W ⁄ ALQ - CO2 - W ⁄ AFTM - (LQ) - CO2 - W ⁄ ATM - CO2 - SD
TECHNICAL DATA
Pressure dependence:
Long-term stability:
Gas exchange:
Ambient temperature:
Response time:
Electrical connection:
Housing:
Housing dimensions:
Cable connection:
Protective tube:
Process connection:
Protection class:
Protection type:
Standards:
Optional:
®
AERASGARD ACO2 - SD
AERASGARD ® ATM - CO2 - SD
®
AERASGARD ACO2 - W
®
AERASGARD ALQ - CO2 - W
AERASGARD ® AFTM - CO2 - W
AERASGARD ® AFTM - LQ - CO2 - W Multifunctional on-wall sensor
Type ⁄ WG02
ACO2 - SD
ACO2-SD-U
ATM - CO2 - SD
ATM-CO2-SD-U
ACO2 -W
ACO2-W
ACO2-W LCD
ALQ - CO2 -W
ALQ-CO2-W
ALQ-CO2-W LCD
AFTM - CO2 -W
AF TM-CO2-W
AF TM-CO2-W LCD
AFTM - LQ - CO2 -W
AF TM-LQ-CO2-W
AF TM-LQ-CO2-W LCD
Outputs:
Equipment:
Optional:
Note:
ACCESSORIES
SF-M
WS-03
± 0.13 % ⁄ mm Hg
< 2 % in 15 years
by diffusion
–10...+60 °C
< 2 minutes
2
0.14 - 1.5 mm , via screw terminals
plastic, UV-resistant, material polyamide, 30 % glass-globe reinforced,
with quick-locking screws (slotted ⁄ Phillips head combination),
colour traffic white (similar to RAL 9016),,housing cover for display is transparent!
126 x 90 x 50 mm (Tyr 2)
cable gland, plastic
(M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm
by screws
III (according to EN 60 730)
IP 65 (according to EN 60 529)
CE conformity, electromagnetic compatibility according to EN 61 326, EMC Directive 2014 ⁄ 30 ⁄ EU
three-line display with illumination, cutout approx. 70 x 40 mm (W x H),
for displaying actual humidity, actual temperature, air quality and / or the actual CO2 content
On-wall CO2 sensor and measuring transducer, Standard
On-wall temperature and CO2 sensor, Standard
On-wall CO2 sensor, Premium
On-wall air quality (VOC) and CO2 sensor, Premium
Multifunctional on-wall sensor
for humidity, temperature and CO2 content, Deluxe
for humidity, temperature, CO2 content and air quality (VOC), Deluxe
Measuring Range
Humidity Temperature
– –
– –35...+80 °C
– –
– –
– –
– –
0...100 % r.H. –35...+80 °C
0...100 % r.H. –35...+80 °C
0...100 % r.H. –35...+80 °C
0...100 % r.H. –35...+80 °C
0 -10 V or 4...20 mA (selectable via DIP switches, selected variant applies for all outputs) –
Standard on-wall sensor ATM - CO2 - SD with fixed output 0 -10 V!
W = changeover contact – Standard on-wall sensor ATM - CO2 - SD without changeover contact !
Cable connection with M12 connector according to DIN EN 61076-2-101 (on request)
This unit must not be used as safety-relevant device!
Metal sinter filter, Ø 16 mm, L = 32 mm, exchangeable
stainless steel V4A (1.4404)
Weather and sun protection hood, 200 x 180 x 150 mm,
stainless steel V2A (1.4301)
CO2 VOC
(switchable)
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm –
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm 0...100 %
0...2000 ⁄ 5000 ppm 0...100 %
(switchable)
0...2000 ⁄ 5000 ppm –
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm 0...100 %
0...2000 ⁄ 5000 ppm 0...100 %
11
Equipment Item No.
Display (Baldur 2)
– 1501-711 0-1001- 200
– 1501-711 2-1001- 200
W
1501-7110- 7301- 200
W ■
1501- 7110- 7371-200
W
1501-7111- 7301- 500
W ■ 1501- 7111- 7371-500
W 1501- 7116- 7301-20 0
W ■
1501- 7116- 7371-20 0
W
1501- 7118- 7301-50 0
W ■
1501- 7118- 7371-50 0
7000- 0050-2200- 100
7100- 0040- 6000- 000
Rev. 2021 - V25
(continued)