Trix 185.1 Serie Mode D'emploi page 15

CV Discription
1 Address
2 PoM Minimum Speed
3 PoM Acceleration delay
4 PoM Braking delay
5 PoM Maximum speed
8 Factory Reset / Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part)
18 Extended address (lower part)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128*
29 PoM Bit 2: DCC operation with braking area
(no analog operation possible)
Bit 5: Address length 7 Bit / 14 Bit
PoM Program on the Main; must be supported by the controller
* The speed levels on the locomotive decoder and on the controller must agree with each other; otherwise,
you may have malfunctions.
*** The values for the desired settings must be added.
DCC Value
1 - 127
0 - 255
0 - 255
0 - 255
0 - 255
8
0 - 255
0 - 255
CV 29, Bit 5 =1
CV 29, Bit 5 =1
0 - 255
0 - 255
0 - 255
0 / 1
***
0 / 2
0, 1, 2, 3, 4, 5, 6,
0 / 4
7, 32, 34, 35, 36,
37, 38, 39
0 / 32
Factory-Set
3
3
12
12
245
131
0
1
192
128
0
0
0
6
15