Publicité
Les langues disponibles
Les langues disponibles
6.1.6 Sheath assembly
The operation is only to be carried out with
UL certified versions.
Prepare the silicone sheath (01), seal cap (02),
connector (03) and the oval blocking device (04).
02
01
Fig. 11
Straight cut of conduit.
Fig. 12
Position the sealing plug on the sheath.
Fig. 13
MNVKUPTPSUL_1423_EN
03
04
Push the silicone sheath and seal cap completely into
the connector. The seal cap must not be seen through
the window of the oval blocking device.
Fig. 14
Install retaining oval clip. To re-open use a
screwdriver.
Fig. 15
7
Publicité
