ENGLISH
Use the • and ª cursor buttons to select the
MP3 file you want to play, then press the PLAY
button or ENTER button.
• Playback starts.
The display can be switched between the
single elapsed time and the single remaining
time and the track name by pressing the
DISPLAY button.
Programmed playback is not possible with
MP3 discs.
To change the MP3 file
Press the STOP button, then use the • and ª
cursor buttons to reselect the desired MP3
3
file.
To set the random play mode
In the stop mode, press the RANDOM button.
Then press the PLAY button or ENTER button.
To set the repeat mode
The repeat mode changes each time the
REPEAT button is pressed.
FOLDER
TRACK REPEAT
FOLDER REPEAT
To return to the initial disc information
screen
Press the STOP button, use the cursor button
to select "ROOT", then press the ENTER
button. The screen in step 1 reappears.
NOTES:
• The DVD-2200 is compatible with the "MPEG-1 Audio Layer 3" standards (sampling frequency of 44.1 or
48 kHz). It is not compatible with such other standards as "MPEG-2 Audio Layer 3", "MPEG-2.5 Audio
Layer 3", MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
• The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether
the audio output presetting is set to "normal" or "PCM". The signals are output with the same sampling
frequency as that of the music source.
• In general, the higher an MP3 file's bit rate, the better the sound quality. On the DVD-2200, we recommend
using MP3 files recorded with bit rates of 128 kbps or greater.
• MP3 files may not be played in the expected order, since the writing software may change the position of
the folders and the order of the files when writing them on the CD-R/RW.
• Programmed playback is not possible with MP3 discs.
• When writing MP3 files on CD-R/RW discs, select "ISO9660 level 1" as the writing software format. This
may not be possible with some types of writing software. For details, refer to the writing software's usage
instructions.
• The number of files playable with the DVD-2200 is approximately 600 or less.
• With the DVD-2200 it is possible to display folder names and file names on the screen like titles. The DVD-
2200 can display up to 8 characters, consisting of numbers, capital letters, and the "_" (underscore) mark.
• If recorded in a format other than "ISO9660 level 1", normal display and playback may not be possible. In
addition, folder and file names including other symbols will not be displayed properly.
• Be sure to add the extension ".MP3" to MP3 files. Files cannot be played if they have any extension other
than ".MP3" or if they have no extension. (with Macintosh computers, MP3 files can be played by adding
the extension ".MP3" after the file name consisting of up to 8 capital or numbers and recording the files
on the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive
gets on the surface of a disc, the disc may get stuck inside the DVD-2200 and be impossible to eject.
• The DVD-2200 is not compatible with packet write software.
• The DVD-2200 is not compatible with ID3-Tag.
• The DVD-2200 is not compatible with play lists.
• The DVD-2200 is not compatible with MP3 PRO.
• Do not play CD-R/RW discs containing any files other than music CD files (in CDA format), MP3 and JPEG
files. Doing so may result in malfunction or damage, depending on the type of file.
28
D I SC I NF ORMATION
ROOT
• •
0
F OL DER 1
MP3 _ 0 1
1
F OL DER 2
MP3 _ 0 2
2
F OL DER 3
MP3 _ 0 3
3
F OL DER 4
MP3 _ 0 4
4
F OL DER 5
MP3 _ 0 5
5
PL AY MODE
FOL DER
S I GNAL ELAPSED
- - : - -
S INGL E :
DEC ISION : ENTER BUTTON
Remote control unit
PLAY
PLAY
ENTER
1
Remote control unit
Main unit
Remote control unit
16
PLAYING STILL PICTURE FILES (JPEG FORMAT)
2
JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and
enjoyed on the DVD-2200.
Playing picture CDs
2
Kodak picture CDs and Fujifilm Fujicolor CDs can be played on the DVD-2200.
When a picture CD is played, the photographs on the picture CD can be displayed on a TV.
("Picture CD" and "Fujicolor CD" are service by which photographs taken on conventional silver film cameras
are converted into digital data and written on CDs. For details on Kodak picture CD, contact a store that offers
Kodak development services. For details about Fuji Color CDs, please contact a store offering Fuji Photo Film
developing services.)
1
Load the picture CD into the DVD-2200.
• When the disc is loaded, a maximum of 6 still pictures
1
are displayed automatically.
• The slide show continues until the STOP button is
pressed.
Playing still pictures stored on CD-Rs/RWs
1
Load the CD-R/RW on which the still pictures have been
written into the DVD-2200.
• When the disc is loaded in the DVD-2200, the disc
1
information screen appears.
• If there are multiple folders proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
1
OPEN /
POWER
NTSC / PAL
CLOSE
ON
OFF
PROG / DIR
1
2
3
CLEAR
4
5
6
SRS.TS
7
8
9
CALL
RETURN
0
+10
TOP MENU
DISPLAY
T. MENU
DISP.
ENTER
PLAY
MENU
STILL /
STOP
PAUSE
SKIP
SLOW / SEARCH
ANGLE
SUBTITLE
AUDIO SEARCH MODE
OPEN/CLOSE
5
OPEN /
CLOSE
Main unit
Remote control unit
1
3
OPEN /
POWER
NTSC / PAL
CLOSE
ON
OFF
PROG / DIR
1
2
3
CLEAR
4
5
6
SRS.TS
7
8
9
CALL
RETURN
0
+10
TOP MENU
DISPLAY
2, 3
T. MENU
DISP.
ENTER
PLAY
MENU
STILL /
STOP
PAUSE
SKIP
SLOW / SEARCH
ANGLE
SUBTITLE
AUDIO SEARCH MODE
D I SC I NFORMATION
ROOT
ROOT
JPEG 1
JPEG 2
JPEG 3
JPEG 4
JPEG 5
PL AY MODE
FOL DER
S I GNAL ELAPSED
- - : - -
S INGL E :
DECI SION : ENTER BUTTON
1
1
3
0
1
2
3
4
5