Setting The Time, Time Zone And Weekday Manually - Auriol Z31961A Instructions D'utilisation Et Consignes De Sécurité

Note: The following languages are available:
GER = German
ENG = English
DAN = Danish
18 GB/IE
96487_aur_Funkwecker_Content_LB3.indd 18
Setting the time, time zone and
weekday manually
Press and hold down the MODE button
3 seconds. The minute display
Press the UP
13
desired time zone (–12 hours to + 12 hours).
Note: Should you be in a country in which the DCF
signal can be received but the time is different to your
current local time, you can use the time zone setting
to have the clock display your current local time. For
example, if you are in a country where the local time
is one hour behind Central European Time (CET), then
you should set the time zone to + 01. The time continues
to be controlled by DCF but the clock shows one hour
more.
Press the MODE button to confirm your setting.
Set the hours, minutes, the year, the day and the lan-
guage of the weekday in the same manner.
4
or DOWN button to set the
11
for approx.
12
flashes.
ESP
NET
ITA
FRA
S
T
t
b
A
fl
P
P
T
P
P
w
i
P
f
16.01.14 12:41