Adding Fuel; Operation - Palazzetti ECOPALEX GTM Notice D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

9.2 adding fuel

During operation, to add fuel, it is necessary to
follow this procedure:
• Open the fire door slowly in order to avoid
smoke escaping into the room (depending on
the draught in the flue).
• Refill the fire box with fuel and then close the
fire door.
Do not overheat the product by inserting an
excess quantity of fuel.
Introduce fuel when the embers have formed
and the flame has lowered.
The appliance is equipped with a bypass valve,
which, when opened, facilitates the escape of
smoke into the flue, minimising puffs of smoke
into the environment.

9.3 operation

Combustion control
Combustion is adjusted using the air regulator
(a) (Fig. 21). Turning it toward the symbols (+) or
(-) a higher or lower flow of combustion air will
be obtained and consequently a faster or slower
combustion will result.
Glass cleaning
During operation, it is possible to facilitate the
cleaning of the ceramic glass by means of the
adjustment lever (a) (Fig. 21) without having to
open the door.
If the lever is opened completely (+) a flow of
air hits the ceramic glass surface, cleaning it. To
carry out this operation, use the one-finger glove
provided.
A
Product images are for illustrative purposes only
004778990 - 11/02/2022
ITALIANO
ENGLISH
Fig. 21
DEUTSCH
FRANÇAIS
ESPAÑOL
55

Publicité

Table des Matières
loading

Table des Matières