Hoppe FingerScan Notice De Montage Et D'utilisation page 30

new code should be protected from misuse or loss!
Please note: Each press of the keys is confirmed by the green LED briefly lighting up.
1. Hold the remote control directly in front of the LEDs.
D
2. Press the keys
3. Enter the old delete code
OK
4. Press the key
5. Enter the new 6-digit code
6. Press the OK key
7. Enter the new code again
8. Press the OK key
9. Both LEDs flash three times on correct completion of the process.
5.10 Lock mode
If an unauthorised finger (red LED is on) is drawn across the sensor ten times in succession,
then the device switches to the lock mode. The lock mode is time-limited. The locking period is
extended after every 10 further false attempts (locking intervals: 1 minute, 5 minutes, 30 minutes
and 1 hour).
Unlocking: The lock mode can be ended ahead of schedule at any time, by drawing a taught-
in finger (master or user finger) once across the sensor. The door may subsequently be opened
as normal with the user finger.
6. Technical data
Finger scanner sensor:
Lifetime:
Operating voltage:
Relay data:
Operating temperature:
Security class:
Moisture tolerance:
Memory:
Warranty:
7. Disposal
The product must not be disposed of via the normal household waste. Users are
obliged to dispose of used devices at a collection point for used electrical and elec-
tronic devices. Waste sorting and proper disposal of your old devices contributes to-
wards maintaining natural resources and ensures that materials are recycled in a way
30
E
and one after the other
Line sensor
> 2 million uses
8 to 24V DC
24VDC, 15mA (max)
-20 to +60° C
IP 65
up to 95% relative air humidity
up to 150 fingerprints
24 months