Section 2-Installation - Invacare InTouch PCS ITPCST Manuel D'utilisation Et D'entretien

SECTION 2—INSTALLATION
SECTION 2—INSTALLATION
Check ALL fasteners periodically to ensure that mechanical connections and attaching hardware
are tightened securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are discovered. Corrective maintenance can be per-
formed at or arranged through your equipment supplier.
NOTE: The installation instructions differ for a Invacare Power Wheelchair with Power Recline from the installation instructions for a
manual or a power wheelchair with round canes 7/8" nominal to 1" diameter.
1. Remove any existing back upholstery or back system from the chair before installation. Refer to Owner's Manual
shipped with wheelchair.
2. Install the back. Refer to the table below for applicable installation and adjustment instructions.
TYPE OF
INSTALLATION
Manual or Power wheelchair with
round canes 7/8" nominal to 1" dia.
Invacare Power Wheelchair
w/Power Recline
™ ™
InTouch PCS Positioning Back
WARNING
FOR INSTALLATION
INSTRUCTIONS, REFER TO
Installing the Back on page 7.
Installing the Back - Invacare Power
Wheelchairs with Power Recline on
page 10.
ADJUSTMENTS
HEIGHT - YES
DEPTH - YES
ANGLE - YES
HEIGHT - YES
DEPTH - NO
ANGLE - NO
6
FOR APPLICABLE
ADJUSTMENTS, REFER TO
For height adjustment, refer to
Install/Adjust the Back on the Back
Cane Mounting Assemblies on
page 8. For depth and angle adjust-
ment, refer to Adjusting the Back
Depth and/or Angle on page 9.
For height adjustment, refer to
Refer to Installing the Back - Invac-
are Power Wheelchairs with
Power Recline on page 10.
Part No 1163138