Burkert 8642 Manuel D'utilisation page 46

FSAVE_TIME
FSAVE_TYPE
FSAVE-VAL-D
SIMULATE
CHECK_BACK
CHECK_BACK_MASK Definition of supported CHECK_BACK informtion bits
Time in seconds after which the „Failsave" action starts
after abortion.
The maximum value for this time is approx. 18 hours.
Reaction on "Fail Save"
0 = valve retains the last state
1 = valve switches according to FSAVE_VAL_D
2 = valve becomes potential-free
The present discrete output value to use when failure
occurs.
Enables the simulation of READBACK_D
Information of the device
Bit Information
0 in "Fail-save" position
8 Valve opens
9 Valve closes
16 The number of switching cycles pre-defined in
TRAVEL_COUNT_LIM has been exceeded
20 Time for opening exceeded
21 Time for closing exceeded
1 = active
0 = inactive
1 = supported
0 = not supported
8642 - 45