Burkert 8642 Manuel D'utilisation page 26

Parameter
DESCRIPTOR
DEVICE_MESSAGE
DEVICE_INSTAL_DATE
LOCAL_OP_ENA
IDENT_NUMBER
VIEW_1
Abbreviations in the following table:
Memory (memory class required)
N Non-volatile parameter that must be observed in the working
cycle. It does not, however, belong to the static updating
code.
D (dynamic) The value is calculated in the block or read from another
block.
Cst (constant) The parameter does not change.
Access
r read only
r/w read / write
Parameter description
User-definable text to describe the device within
the application
User-definable message to describe the device
within the application or in the plant
Date of installation of device
0 no local operation
Selection of GSD file
0 profile-specific
1 manufacturer-specific (default)
contains the variables:
ST_REV
MODE_BLK
ALARM_SUM
DIAGNOSIS
8642 - 25