Burkert 8642 Manuel D'utilisation page 34

6.2.2.5 Description of the Block parameters of the transducers
• suitable for solenoid valve applications
• two proximity switches for each magnet output
• the input signals indicate the ON/OFF state of the valve
Parameter
VALVE_MAN
ACTUATOR_MAN
VALVE_SER_NUM
ACTUATOR_SER_NUM
VALVE_ID
ACTUATOR_ID
ACTUATOR_ACTION
TRAVEL_COUNT
Description
Name of the valve manufacturer
Name of the actuator manufacturer
Serial number of valve belonging to the
device
Serial-number of actuator belonging to the
device
Identification of valve (-type)
Identification of the actuator (-type)
Fail-safe position for power-loss of the
actuator resp. the valve:
0 not initialized
1 opening
2 closing
Number of cycles from „open" to „closed"
and from „closed" to „open".
The number range of TRAVEL_COUNT
exceeds the storage capacity of the
EEPROM
8642 - 33