Troubleshooting (cont.)
Interface Troubleshooting Table
Symptoms
Probable Cause
2.
System will not
A. Interface cable
turn on and
control module
power light
(red) is on and
B. Water supply is
the status light
(green) is on
C. Garbage disposal
and blinking.
NOTE: Status
lights are located
near the interface
cable connection,
D. Hard object is
on the control
module, port 6.
E. If none of the
3.
Water runs
A. Garbage disposal
during Long
Rinse and
Extended Rinse
cycles but the
disposal does
not turn on.
B. If the above
1095326-5-B
Recommended Action
A. Check the interface
connection may be
cable connection,
loose or
connect if needed.
disconnected.
B. Turn on the water
not turned on.
supply.
C. Check disposal
connection is loose
power supply
or disconnected.
connection to the
control module and
reconnect if needed.
D. Press icon with pad
being used to press
of finger.
icons.
E. Contact your Kohler
recommended
Co. Authorized
actions for the
Service
above issues
Representative.
correct the
symptom, the user
interface or control
module may
require servicing.
A. Check disposal
connection is loose
power supply
or disconnected.
connection to the
control module and
reconnect if needed.
B. Contact the garbage
recommended
disposal
action does not
manufacturer's
correct the
customer service.
symptom, the
garbage disposal
may require
servicing.
8
Kohler Co.