Moulinex SLIMFORCE DD853810 Mode D'emploi page 16

- Plug in the motor unit (A) and press the speed start button (B1 or B2) and
process food.
- Remove the motor unit (A) then the lid (E4) then the inner cover (E3).
- Remove the blades (E2), holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
• 500 ml maxi chopper (depending on model): Fig F & 5
- Place the bowl (F1) on the anti-slip ring (F4).
- Fit the blades (F2) onto the drive pin of the bowl (F1).
- Place the ingredients in the bowl (F1) then fit the cover (F3).
- Fit the motor unit (A) onto the cover (F3).
- Plug in the motor unit (A) and press the speed start button (B1 or B2).
- Remove the motor unit (A) then the cover (F3).
- Remove the blades (F2) holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
• Multi-wire whisk (depending on model): Fig G & 6
- Fit the multi-wire whisk (G2) onto the reducer (G1).
- Fit the reducer (G1) onto the motor unit (A).
- Turn until it is locked in place.
- After use, unscrew the reducer (G1) and remove the whisk (G2).
- Do not operate the multi-wire whisk at turbo speed for more than 3 minutes.
CLEANING
• All of the parts and accessories of your mixer can be cleaned in the dishwasher
except for the motor unit (A) and the reducers (E4, F3, G1), they can only be
cleaned with a damp cloth.
• Unplug the appliance from the electrical power supply before cleaning.
• Do not use abrasive scourers or objects containing metal parts.
• Do not immerse the motor unit (A) in water or any other liquid. Wipe it clean with
a dry or slightly damp cloth.
• If your accessories are discoloured by food (carrots, oranges, etc.) rub them with
a cloth dipped in cooking oil and then clean them as usual. Some staining may
occur over time but this will not affect the performance of the appliance.
• Handle the blades with care; they are extremely sharp.
RECIPES
Mixer foot (parts A, B, C, D)
16