Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
The egg turning unit art. 556M-1 enables the incubators ET 12, 24 and 49 to operate automatically.
The procedure is the same for all the models of our incubators.
1 – INSTALLATION
Pull out the metal handle for the semiautomatic turning of the eggs from the incubator and remove the egg tray.
Place the capsized base of the incubator on a table. Place the egg turning unit inserting its steel tongue into the
hole and making it adhere perfectly to the side and bottom of the incubator.
Keeping it in place, fix it to the bottom using the two supplied screws.
The unit is now installed Replace the egg tray. Ensure
that the steel tongue of the motor is inside the fissure of
the egg tray element.
6
Publicité
