Publicité
Les langues disponibles
Les langues disponibles
AS-6030
| ENGLISH
Deleting all TRANSMITTERS
1. Press the button (2) on the receiver for 2 seconds. The
LED Status (3) begins to flash red.
2. Press the button (2) for 2 seconds again. The LED Status
(3) stops flashing on the RECEIVER and the deletion is
completed for all TRANSMITTERS.
FUNCTIONAL TEST
The temperature at the thermo-sensor (10) of the furnace
transmitter (9) is crucial for the function testing of the
exhaust air control.
Thermo-sensor (10) of the furnace transmitter
is < 38°C
1. Switch ON exhaust unit and window is closed
> Exhaust unit must start up.
2. Open window
3. Close window
Thermo-sensor (10) of the furnace transmitter
is > 38°C
1. Switch ON exhaust and window is closed
> Exhaust unit must not start up.
2. Open window
3. Close window
MEANING OF THE LED DISPLAYS
RECEIVER/CONTROL CENTRE
LED Status (3)
Red flashing Teach-in mode > No transmitter taught in
Green continuously lit
> Exhaust unit must remain on.
> Exhaust unit must remain on.
> Exhaust unit must start up.
> Exhaust unit must switch off.
> Furnace transmitter is taught
in without window transmitter
Red continuously lit
Red and green lit
Green off
Red off
WINDOW TRANSMITTER
LED Status (5)
Off
Green flashing
Red flashing
RED and GREEN flashing 0.5 s > Window transmitter
FURNACE TRANSMITTER
Dark
Green flashing
Red flashing
Battery control LED
flashing 0.5 s
MALFUNCTIONS
Malfunctions can occur in individual cases due to overlaps
with other, similar radio devices. It is normally sufficient if
you check and, if necessary, adjust the positioning of the
components. If one of the transmitters is no longer reachable
(battery discharged, mechanically defective or no radio
reception), the control centre no longer interconnects as long
as the fault is present.
22
> Window transmitter is taught
in without furnace transmitter
> Window transmitter and
furnace transmitter
are taught in
> Furnace transmitter
not taught in
> Window transmitter
not taught in
> Rest state / Sleep mode
> Window is being opened
> Window is being closed
battery is discharged
> Rest state / Sleep mode
> FURNACE becoming cold
> FURNACE becoming hot
> FURNACE transmitter
battery discharged
Publicité
