Kettler 0S03011-0000 Instructions De Montage page 7

– EN –
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
■
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
Maintainance – Service – Spare Parts
■
Damaged components may endanger your safety or reduce the lifetime of the equipment.
For this reason, worn or damaged parts should be replaced immediately and the equip-
ment taken out of use until this has been done. Use only original KETTLER spare parts.
■
To ensure that the safety level is kept to the highest possible standard, determined by its
construction, this product should be serviced regulary (once a year) by specialist retai-
lers.
Spare parts order
■
When ordering spare parts, always state the full article number, spare-partnumber, the
quantity required and the S/N of the product (see handling).
Example order: Art. no. 0S03011-0000 / spare-part no. 10100030 / 2 pieces / S/N
....................
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article cor-
rectly and safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire
B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 588983
+44 1527 62423
e-mail:
aftersales@kettler.co.uk
+1 866 804 0440
+1 757 563 9273
e-mail: parts@kettlerusa.com
7