Manual Tuning; Move Stored Channels - Hitachi C1422R Manuel D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
Manual tuning can be used for
Press the YELLOW key twice. The SETUP menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
Item 2 explains how to tune BBC 1 and store it as PROG 01 (You can select any PROG number you want between 00 and 57)
2
Press the GREEN key.
TUNING
1
Note:
Make sure you are in television mode by pressing the
Press the YELLOW key twice. The SETUP menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
Using the Arrow keys
Moving a stored channel will copy your choice into its new location erasing any channel already stored there. To avoid this happening, it is
recommended that you first move the channels to temporary locations beyond the range of the stored programmes before copying them back in
the order you want. It is not necessary to move any channel that is already where it should be. See the following diagram.
Note:
When you move a channel the channel name is not moved, so programs should be named after they have been moved.
2
Press the GREEN key.
MANUAL
Note:
To clear the old channel location, select the SETUP menu, (Green key), move the blue bar with the Arrow keys to the old
channel number, press and hold the Yellow key (SKIP) until the SKIP prompt disappears.

Manual Tuning

a)
Tuning and storing local TV channels and other equipment connected in the
aerial system, such as VCR and satellite receiver.
b)
Moving Auto-tuned channels, (see Move Stored Channels below).
c)
To reduce unwanted interference.
The TUNING menu will appear on the screen
a)
Press
or
to change the PROG number to 01
b)
Press
to move the cursor to MANUAL.
c)
Press
to start manual tuning. Each time a channel is
found the search will stop.
d)
Press
again until BBC 1 is found.
e)
Press
to move the cursor to STORE.
f)
Press
to store BBC 1 as PROG 01.
g)
Press
to return to PROG to select the next number.
Continue steps a to g until all your channels are tuned.
Press the TV key to return to normal viewing or, if you want to name
your TV channels, press the GREEN key (SETUP), and follow the
instructions in step 5 of Tuning Your Television.

Move Stored Channels

TV
key before continuing.
,
,
,
, on your remote control, move the cursor onto the channel you want to move.
Original
Temporary
1------------------------------>--------------------------------
3-------------->--------------22-------- ----->----------------
5-------------->--------------23------------->----------------
4------------------------------>--------------------------------
2-------------->--------------25------------->----------------
The manual TUNING menu will appear on your screen
a)
Press
or
to change the programme number.
b)
Press
to move the blue bar to STORE.
c)
Press
or
to store the new number. (See note below)
Press the TV key to return to normal viewing.
Picture Controls Menu
Page 4
.
.
Final
1
2
3
4
5
.
TUNING
PROG
00
BAND
UHF
››››
MANUAL
››
››››
FINE
STORE
SETUP
Select ∨ ∧
Adjust < >
TUNING
PROG
01
BAND
UHF
››››
MANUAL
››
››››
FINE
STORE
SETUP
Select ∨ ∧
Adjust < >

Publicité

Table des Matières
loading

Table des Matières