Bosch Professional GHG 500-2 Notice Originale page 7

OBJ_BUCH-1364-003.book Page 7 Monday, November 28, 2016 10:41 AM
6 Button for temperature control (GHG 630 DCE)
7 Display (GHG 630 DCE)
8 Wide jet nozzle*
9 Glass protection nozzle*
10 Reflector nozzle*
11 Welding rod*
Technical Data
Hot Air Gun
Article number 0 601 ...
Rated voltage
Rated power input
Air flow
Temperature at the nozzle outlet
(approx.)
Temperature-measuring accuracy
– at the nozzle outlet
– on the display
Display operating temperature*
Weight according to
EPTA-Procedure 01:2014
Protection class
* The display can turn black when not within the operating temperature.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Operation
Starting Operation
 Observe correct mains voltage! The voltage of the
power source must agree with the voltage specified on
the nameplate of the machine. Power tools marked
with 230 V can also be operated with 220 V.
Switching On
GHG 500-2: Press the On/Off switch 4 to position I or II.
GHG 600-3: Press the On/Off switch 4 to position I, II or III.
GHG 630 DCE: Press the On/Off switch 5 to position I, II or III.
Thermal-protection shut-off: In case of overheating (e.g.
due to air build-up), the power tool automatically shuts off the
heating system, but the blower will continue to run. When the
power tool has cooled down to the operating temperature,
the heating system is automatically switched on again.
Switching Off
GHG 500-2/GHG 600-3: Press the On/Off switch 4 to posi-
tion 0.
GHG 630 DCE: Press the On/Off switch 5 to position 0.
GHG 600-3/GHG 630 DCE: After working for a longer time
with high temperature, allow the power tool to cool down by
running it in the cold air setting I before switching off.
Bosch Power Tools
12 Welding shoe*
13 Reduction nozzle*
14 Heat-shrinkable sleeve*
15 Angle nozzle*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GHG 500-2 GHG 600-3
94A 0.. 94B 0..
V 220–240 220–240
W 1600
l/min 240/450 250/350/500
°C 300/500 50/400/600
±10 %
–
°C –
kg 0.78
/II
Setting the Air Flow and Temperature
(GHG 500-2/GHG 600-3)
With the On/Off switch 4, you can select between different air
flows and temperature combinations:
Setting
I
II
III
GHG 600-3: The cold air setting I is suitable for cooling a
warmed workpiece or for drying of paint. It is also suitable for
cooling the power tool before placing it down or when chang-
ing nozzles.
Regulating the Air flow (GHG 630 DCE)
With the On/Off switch 5, you can regulate the air flow in three
steps:
Setting
I
II
III
As an example, reduce the air flow when the surrounding area
of a workpiece is not to be heated excessively or when a light
workpiece could be moved away by the air flow.
English | 7
GHG 630 DCE GHG 630 DCE
94C 7..
115–127
1800 1500
110/250/400 150/300/500
50–600
±10 % ±10 %
– ±5 %
– 0...+50
0.78 0.94
/II /II
GHG 500-2 GHG 600-3
l/min °C l/min
240 300 250
450 500 350
– – 500
For rated voltage
115–127 V: 220–240 V:
l/min l/min
110 150
250 300
400 500
1 609 929 3AM | (28.11.16)
94C 7..
220–240
2000
50–630
±10 %
±5 %
0...+50
0.94
/II
°C
50
400
600