System Example - Alpine DVA-9861 Mode D'emploi

System Example

Connect the Ai-NET compatible digital audio processor (Fiber optic compatible) and touch panel-compatible monitor/changer.
System switch EQ/DIV
Video output Lead
(Yellow)
Remote control input Lead
(White/Brown)
Monitor control Lead
(White/Pink)
To Digital output terminal
• When the fiber optic compatible product is connected, it is necessary to set
the mode of this unit. Refer to "Setting the Digital Output" (page 26) and set
to ON.
Please observe the following when using Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
Video input terminal
RCA Extension cable (Video)
(Included)
Remote control output lead
(White/Brown)
Monitor control Lead
Fiber optic Cable
Fiber optic input terminal (for head unit)
Ai-NET Cable
Ai-NET output terminal
Touch panel-
compatible
monitor box
(sold separately)
(White/Pink)
Ai-NET compatible digital
audio processor
(sold separately)
(Fiber optic compatible)
Ai-NET compatible CD
changer (sold separately)
Only connect fiber
*
optic compatible
CD changer
Touch panel-
compatible monitor
(sold separately)
Ai-NET Cable
Fiber optic
input terminal
(for changer)
*
Fiber optic
cable
67
-EN