Searching By Album Name; Searching By Song Name; Direct Search Function; Select Playlist/Artist/Album - Alpine DVA-9861 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To search for a song of the selected album
1 After selecting the album in step 2*
to the song search mode of the selected album.
2 Turn the Rotary encoder* to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• If you choose ALL in step 3*
iPod are played back. If you choose ALL, and you press
ALBUM search mode for all artists is activated.
• If you choose ALL in step 2*
selected artist are played back. If you choose ALL, and you press
the SONG search mode for the selected artist is activated.
• Artist name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to "Direct Search Function" (page 46).

Searching by album name

1
Press
to activate the search selection mode.
2
Turn the Rotary encoder to select the ALBUM
search mode, then press
PLAYLIST
ARTIST
3
*3
Turn the Rotary encoder to select the desired
Album.
4
Press
/
.
The selected Album is played back.
To search for a song of the selected album
1 After selecting the album in step 3*
to the song search mode of the selected album.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• If you choose ALL in step 3*
iPod will be played back. If you choose ALL, and you press
SONG search mode for all albums is activated.
• Album name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to "Direct Search Function" (page 46).

Searching by song name

1
Press
to activate the search selection mode.
2
Turn the Rotary encoder to select the SONG
search mode, then press
PLAYLIST
ARTIST
46
-EN
1
, press
to change
for at least 2
2
, and you press
/
, all songs in
, the
1
, and you press
/
, all songs of the
.
ALBUM
SONG
PLAYLIST
3
, press
to change
for at least 2
3
, and you press
/
, all songs in the
.
ALBUM
SONG
PLAYLIST
3
Turn the Rotary encoder to select the desired
Song.
4
Press MODE.
The selected song is played back.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• Song name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to "Direct Search Function" (page 46).

Direct Search Function

,
The unit's direct search function can be used to search for an album,
song, etc., more efficiently. In the PLAYLIST/ARTIST/ALBUM/SONG
mode, you can quickly target any song.
1
In the search mode, press any one of the buttons 1
through 6 to quickly jump skip over a designated
percent of your song content.
SONG search example:
If there are 100 songs in your iPod, they are divided into 6
groups using percentages (shown below). These groups
are assigned to buttons 1 through 6 on the unit.
Example 1:
Suppose the song you are searching for is located at
around the middle (50%) of your library: press button 4 to
jump to the 50
the song you desire.
Example 2:
Suppose the song you are searching for is located near
the end (83%) of your library: press button 6 to jump to
rd
the 83
song and turn the Rotary encoder to find song
you desire.
0%
Preset
1
buttons
First
Songs
song
, the

Select Playlist/Artist/Album

Playlist/Artist/Album can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
1
Press
or
Album.
• If search selection mode is not activated, only SONG is searched, this
operation is not possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X.) playback, this operation is not possible.
th
song and turn the Rotary encoder to find
All 100 songs (100%)
17%
33%
50%
2
3
4
17th
33rd
50th
song
song
song
to select the desired Playlist/Artist/
for at least 2
67%
83%
5
6
67th
83rd
song
song

Publicité

Table des Matières
loading

Table des Matières