Searching By Group Number; Searching By Program Or Playlist Number; Searching Directly By Chapter Or Track Number; Repeat Playback - Alpine DVA-9861 Mode D'emploi

Searching by Group Number

A group number on a DVD identifies various audio sections similar to
chapters for video. Use this function to easily find positions on the DVD
using its group number.
• This operation is performed by the remote control unit.
When playback stops, input the number of the group you
want to play using the numeric keypad ("0" to "9").
Playback starts from the selected group number.
• While in PRE-STOP, this function finds the beginning of the track by
its number. For operation, refer to "Searching Directly by Chapter or
Track Number" (page 18).
• This function cannot be used on discs on which no group numbers
are recorded.
Searching by Program or Playlist
Number
Use this function to easily find positions on the DVD using the DVD's
programs/playlist.
• This operation is performed by the remote control unit.
1
When playback stops, input the number of the
program or playlist you want to play using the
numeric keypad ("0" to "9").
2
Press ENT.
Playback starts from the selected program or playlist
number.
• While in PRE-STOP, this function finds the beginning of the chapter
by its number.
• This function cannot be used on discs on which no program/playlist
numbers are recorded.
• Press CLR to delete the last digit in the program/playlist number.
Press and hold CLR for at least 2 seconds to cancel the input mode.
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
• This operation is performed by the remote control unit.
1
During playback, pre-stop or pause, input the
chapter or track number you want using the
numeric keypad ("0" to "9").
2
Press ENT.
Playback starts from the selected chapter or track.
• This function cannot be used on discs on which no chapter numbers
are recorded.
• During stop, search can be made for Video CD.
• The beginning of a track number cannot be directly found on the
Video CD equipped with PBC (playback control). Set VCD PLAY
MODE to turn the PBC function off. Refer to "Setting the Video CD
Play Mode" (page 31).
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
18
-EN
• Press CLR to delete the last digit in the chapter/track number. Press
and hold CLR for at least 2 seconds to cancel the input mode.

Repeat Playback

Use this function to play the disc's titles, chapters, tracks, etc.,
repeatedly.
During playback, press
The repeat mode switches each time the button is pressed.
DVD Audio (VCAP mode)*1
The track is played repeatedly.
The group is played repeatedly.
The mode returns to normal playback.
(Factory default)
DVD Audio (VOFF mode)*1
The track is played repeatedly.
The group is played repeatedly.
The entire disc is played repeatedly.
(Factory default)
DVD Video
The chapter is played repeatedly.
The title is played repeatedly.
The mode returns to normal
playback. (Factory default)
DVD-VR (while playing back program)
The chapter is played repeatedly.
The program is played repeatedly.
All programs are played repeatedly.
(Factory default)
DVD-VR (while playing back playlist)
The chapter is played repeatedly.
The playlist is played repeatedly.
The mode returns to normal
playback. (Factory default)
4 on the main unit.